Environmental Monitoring Units
VT225t Office monitoring unit
The VT225 / Office Monitoring Unit can be used for remote environmental monitoring in small offices.
VT825 Data Center Monitoring Unit
The VT825 / Data Center Monitoring Unit can be used for remote environmental monitoring in data centers.
VT335t IT Monitoring unit
The VT335 / IT Room Monitoring Unit can be used for remote environmental monitoring in small IT rooms. Its primary features include.
Extensions
VT12 Relay Module
VT12 Relay Module is a dual-channel switching unit designed to turn on/off loads. It can be connected to the dry contacts outputs of VT855 and VT336 Vutlan monitoring units to turn on/off loads with current up to 1A, when the device's Dry contact output is triggered.
VT11 Relay output
The VT11 Relay output is designed to turn on/off loads. It can be connected to the 12VDC relay output of any Vutlan monitoring device to turn on/off when the device's 12V output is triggered.
VT32 Dry contacts extension board for VT440
An extension board "VT32 / dry contacts board".
VT485m Modbus RTU extension
The VT485M / Modbus expansion board transmits measured data from Modbus devices to the Vutlan monitoring device.
VT7670 4G modem
The VT7670/ 4G modem supports receiving and sending SMS messages via 2G, as well as providing Ethernet connectivity over LTE (4G).
VT485r OSDP reader board
The VT485r is an extension PCB board that allows for the connection of readers and keypads that support the OSDP protocol. This board is compatible with Vutlan monitoring systems, including VT335t, VT336t, VT825t, and VT855t.
VT440 Dry Contacts Unit
The VT440 expansion module increases the number of dry contacts that can be connected to any Vutlan monitoring device.Each VT440 module has 32 dry contacts, which can be expanded to 64 using the "VT32 / Dry Contact Board".
VT408 Sensor extension unit
The VT408 expansion module increases the number of analog sensors that can be connected to any Vutlan monitoring device.
Sensors
VT594 BMS leak water sensor
The VT594 Water Leak Sensor is designed for integration with Building Management Systems (BMS) to provide continuous monitoring for water leaks by measuring the resistance drop in the connected WLC Leak Detection Cable. This sensor requires a WLC Leak Detection Cable, which must be ordered separately and is available in a variety of lengths.
HAT-100Q1 AC Current Transducer
The HAT-100Q1 is a simple open-loop DC ammeter capable of measuring AC current in the 0-100A range. It connects to the monitoring system via the VT407 transceiver.
HOS-100Q1 DC Current ammeter
The HOS-100Q1 is a simple open-loop DC ammeter capable of measuring DC currents in the range of ±100A. It connects to the monitoring system via the VT406 transceiver.
VT580 Dust particles sensor
The VT580 Dust particle sensor is designed to monitor air quality and pollution levels. Its measurement principle is based on laser scattering. The sensor provides accurate measurements from the moment it is first turned on and throughout its service life, which is more than ten years.
VT420 4-20mA Current Loop Converter
The VT420 / 4-20Ma current monitor converts measured DC current from different sensors into a format compatible with the Vutlan monitoring system. The system interface allows you to assign the sensor and introduce the function data conversion.
VT500 Temperature sensor
The VT500 Temperature sensor is designed for indoor temperature measurements, providing an accuracy of ± 0.25 °C at room temperature.
VT501 Outdoor temperature sensor
The VT501 Temperature sensor is designed for outdoor temperature measurements, providing an accuracy of ± 0.25 °C.
VT530 Access sensor
The VT530 Access Sensor is essential for access control and is designed to monitor the status of doors and windows (open or closed). It consists of two parts: a magnet and a sensor.
VT540 Vibration Sensor
The VT540 Vibration Sensor is designed to detect and monitor vibrations when installed on surfaces such as walls or windows.
VT550 Anemometer
The VT550 Anemometer is designed to measure air flow velocity generated by devices such as air conditioners, HVAC systems, fans and ventilation systems.It monitors air flow in the range of 0 to 3 m/s.
Software
User Web Interface
The Vutlan web interface provides users with a powerful and intuitive platform to manage and monitor a wide range of devices, sensors, and environmental systems. It's designed for ease of use while offering advanced features for real-time control and automation.
Duplicator license
The Duplicator program is a management tool specifically designed for handling the configuration and firmware updates of multiple Vutlan monitoring devices.